Industry News

What happens when aluminum carbide reacts with other material?

Views : 151
Author : Tongrun
Update time : 2021-12-13 14:44:37
What is Aluminium carbide?
Aluminum carbide, an inorganic compound, the molecular formula is Al4C3, the molecular weight is 143.96, yellow or green-gray crystal block or powder, hygroscopic. Decomposition at high temperature, hydrolysis in cold water to methane and aluminum hydroxide.Used in metallurgy and catalyst.Made from alumina and coke reaction.
 Aluminum Carbide Al4C3 Powder CAS 1299-86-1
What happens when aluminum carbide reacts with water?
In aluminum carbide, each aluminum atom is coordinated into four carbon atoms, so it has a tetrahedral geometry. It is stable up to 1400°C. It breaks down in the water and produces methane. It is known from the above reactions that aluminum carbide breaks down in the water to form methane.
What happens when aluminum reacts with carbon?
At high temperatures, aluminum combines with carbon, nitrogen, sulfur, and phosphorus to form corresponding aluminum compounds. Aluminum carbide (Al4C3), in the form of pale yellow crystals, can be heated by heating a mixture of these elements at temperatures above 1000°C.
Aluminum carbide preparation
By alumina and coke in the electric furnace heating.
Aluminum carbide Al4C3 is prepared by a direct combination of two elemental materials at high temperatures.
A mixture of one part heavy smoke black and six parts heavy aluminum powder was prepared, moistened with pine essential oil, placed in a tight layer in a clay crucible, and covered with toner. The cauldron should be covered and all gaps covered with refractory soil mixed with asbestos fibers. Then, the crucible containing the mixture was placed in an oven for pre-drying, and the mixture was burned at a temperature of not less than 1200℃ for 30 minutes. The reaction proceeds better at a higher temperature. After cooling, the product is treated with dilute hydrochloric acid (or an alkaline solution) while it is cool to remove excess aluminum. The aluminum carbide prepared as a fine crystalline powder is washed with water to remove aluminum chloride, then quickly washed with alcohol, and the product is placed in a drying oven at 80 ~ 90℃ for drying. The product contains a large amount of aluminum nitride.
Pure aluminum carbide is colorless, but products made by this process often have different colors due to impurities in the raw material.
When calcined in hydrogen with a mixture of calculated amounts of aluminum and smoke black, pure products without aluminum nitride can be obtained. This calcination takes place at 1800 ~ 1900℃ for 2 ~ 3 hours. The prepared product is ground and calcined again at the above temperature
What's the difference between CAC2 and Al4C3?
Answer: Probably beryllium carbide [Be2C].And aluminum carbide [Al4c3]. Beryllium oxide [Be0] reacts with carbon at 2000°C[3600°F] to form brick-like beryllium carbide, while the pale yellow aluminum carbide is prepared from aluminum and carbon in a furnace.
TRUNNANO (aka. Luoyang Tongrun Nano Technology Co. Ltd.) is a trusted global chemical material supplier & manufacturer with over 12 years of experience in providing super high-quality chemicals and Nanomaterials. Currently, our company has successfully developed a series of materials. The aluminum carbide produced by our company has high purity, fine particle size, and impurity content. Send us an email or click on the needed products to send an inquiry.
 
 
 
 
Calcium Nitride | Nitride Powder | Boride Powder | 3D Printing Powder | Carbide Powder | Oxide Powder | Silicide Powder