We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Stearic Acid Series

EBS Ethylene Bis Stearamide Emulsion

Item No.: Tr- EBS
EBS Ethylene Bis Stearamide Emulsion is a white emulsion, the product is non-toxic, non-polluting, non-hazardous, and environmentally friendly. It can be used in inks, paints, leather coatings, etc.
Particle Size D50: ≤2μm
EBS Ethylene Bis Stearamide Emulsion Properties

Product name: Ethylene bis stearamide emulsion

Formula: C38H76N2O2

Product property: It is produced by advanced technology, and its appearance is white emulsion. The product is non-toxic, non-polluting, non-hazardous, and environmentally friendly. Easy to disperse in water, with ultra-fine, low-viscosity, good dispersion and compatibility.


About EBS Ethylene Bis Stearamide Emulsion:

EBS Ethylene Bis Steramide emulsion is a white lotion. Ebs Ethylene Bis Steramide is a hard-brittle white high melting point wax, and its industrial products show slightly yellow fine particles; non-toxic, has no side effects on the human body, not soluble in most solvents at normal temperature, can be stable for acid-base and water. The powder is strong with soluble hydrocarbons and aromatic hydrocarbon solvents, with a compound having water wettability at 80 ° C or higher.

EBS is an abbreviation for Ethylene Bis Steramide, is a high melting point synthetic wax, and the two-pole key maintains a highly balanced. Its inherent structure plays unique compatibility and solubility, which can be used as most thermoset thermoplastics. Lubricants and outer lubricants are good pigment dispersants that make the operation smooth and improve the quality of the final product.

Ebs Ethylene Bis Steramide is a newly developed plastic lubricant that is widely used in PVC products, ABS, high-resistant polystyrene, polyolefin, rubber, and plastic product molding, which is related to traditional lubricants such as paraffin. Compared to lubricants such as polyethylene wax, stearate has good external lubrication and good internal lubrication, such that the fluidity and demolding of the fused plastic are improved in plastic molding. Thereby, plastic processing yield is increased, energy consumption is reduced, and the product has a very high surface finish smoothness. Feel free to inquire about the latest price if you would like to buy EBS Ethylene Bis Stearamide emulsion in bulk.


Properties of Ethylene bis ceramide emulsion: 

EBS Ethylene Bis Stearamide Emulsion is a white emulsion, and the product is non-toxic, non-polluting, non-hazardous, and environmentally friendly. It is easy to disperse in water and has the characteristics of superfine, low viscosity, good dispersion, and compatibility.


How is EBS Ethylene Bis Stearamide produced?

The synthesis method of EBS can generally be divided into four routes:

Stearic acid reaction with amine compounds;

The stearate reaction is reacted with an amine compound;

Hardy chloride and amine compounds;

Hydrolysis of nitrile.

The most commonly used are the first and second types. The first method is simple: the reaction conditions are not demanding, with no three disruptions, but low purity; although the EBS is high, the energy consumption is complex, the process is complex, and the process is long.


Application of EBS Ethylene Bis Stearamide Emulsion:

EBS Ethylene Bis Stearamide Emulsion is a white emulsion, and the product is non-toxic, non-polluting, non-hazardous, and environmentally friendly. It is easy to disperse in water and has the characteristics of superfine, low viscosity, good dispersion, and compatibility. 

1. Plastic

In many thermoplastic and thermoset plastics, as internal and external sliding agents, the most representatives, such as ABS, PS, AS, and PVC, are also available in PE, PP, PVAC, Cellulose, Accurate, and Nylon. , phenolic resin, amino plastic, etc., have good finishes and release properties.

In thermoplastic PUR injection molding, the auxiliary agent also serves as an internal release agent, and the amount is 0.1 to 1%.

As the polymethylene gulf agent, the amount of addition is 0.5%, the melt flow rate is increased, and the whiteness, thermal stability, and physical indicators of polyoxymethylene, and the physical indicators are improved.

2. Rubber

Synthetic resins and rubber, Polychloroprene, and GRS (SBR) add 1 to 3% EBS in their emulsion and have good anti-stick and anti-blocking effects; EBS is applied to automotive floor mats, drainage pipes, and other rubber products. It plays an effect of increased surface gloss.

3. Chemical fiber

EBS can increase the heat resistance fluidity of polyester polyamide fibers and impart a certain antistatic effect.

4. Type

Casting sand is added with a phenol resin to add EBS as an exemplary agent.

5. Pigment, filler dispersant

EBS is plastic. Pigment dispersing agent of chemical fiber parent, such as ABS, PS, polypropylene, and polyester pellets.

EBS can also be used as a plastic coloring spread powder.

According to the amount of the pigment filler, the amount added is 0.5 to 5%.

6. Powder coating

EBS can be used as a liquid aid for powder coatings.

7. Coatings, inks

When paint and paint are manufactured, add 0.5 ~ 2% EBS to improve salt fog and moisture-proof effect; adding this product to the paint to improve deleted agent performance increases the level of the baking porcelain surface.

It can be used in furniture polishing agents and printing inks.

8. Other uses

The melting point of petroleum products;

Lubricants and corrosion agents during metal wire; potting materials for electrical components;

Above the papermaking agent and paper coating ingredients;

Dyeing in textile dyeing can be used as a dyeing engineering defoamer and a permanent water drawing agent;

Add this product to the asphalt, reduce the viscosity of the asphalt, and improve the softening point, water-resistance, and weather resistance of the asphalt.

Technical Data of Ethylene bis stearamide emulsion:

Item EB-20
Solid content, % 20±2
Viscosity, cps ≤100
Particle size D50 ≤2um
PH 7-9

Packing & Shipping of Ethylene bis stearamide emulsion:
We have many different kinds of packing which depends on the Ethylene Bis Stearamide Emulsion quantity.
Ethylene Bis Stearamide Emulsion packing: 25kg/barrel, or as your request.
Ethylene Bis Stearamide Emulsion shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.

EBS Ethylene Bis Stearamide Emulsion Properties

Other Names 1,2-Bis(stearoylamino) ethane N,N’-1,2, Ethanediylbisoctadecanamide,
N,N’-Ethylenedi(stearamide), Ethylene distearylamide
Compound Formula C38H76N2O2
Molecular Weight 593.038 g·mol−1
Appearance White, waxy crystals
Melting Point 144 to 146 °C
Solubility in water N/A
Density N/A
Purity N/A
Particle Size D50: ≤2μm
Boling point N/A
Specific Heat N/A
Thermal Conductivity N/A
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A

EBS Ethylene Bis Stearamide Emulsion Health & Safety Information

Safety Warning Warning
Hazard Statements H315, H319, H335
Flashing point 280 °C
Hazard Codes T
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A
Amorphous Boron Powder | High Purity Graphite Powder | Boride Powder | 3D Printing Powder | Zinc Sulfide ZnS Powder | Oxide Powder | Silicide Powder