We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Industry News

What material is Vanadium carbide?

Views : 618
Author : Lzh
Update time : 2023-02-02 12:07:44
What is Vanadium carbide?
Vanadium carbide is a chemical substance, and its molecular formula is VC. Black cubic crystal. The melting point is 2810℃, the boiling point is 3900℃ and the relative density is 5.77. Slightly harder than Shi Ying. Can be prepared by reducing vanadium pentoxide with coke. Mainly used for manufacturing vanadium steel. Can be used as an additive of carbide cemented carbide.
Applications of Vanadium carbide powder
Vanadium carbide is widely used in iron and steel metallurgy, cemented carbide, electronic products, catalysts, high-temperature coating materials, and other fields because of its high hardness, melting point, and high-temperature strength, as well as good electrical and thermal conductivity. Adding vanadium carbide to steel can improve the comprehensive properties of steel, such as wear resistance, corrosion resistance, toughness, strength, flexibility, hardness and thermal fatigue resistance, and can be used as a wear-resistant material in different cutting and.
It can carry out effective vanadium and nitrogen microalloying at the same time, promote the precipitation of carbon, vanadium, and nitrogen compounds in the steel, and more effectively play the role of settlement strengthening and grain refinement.
 The addition of vanadium nitride to steel can improve the comprehensive mechanical properties of steel such as strength, toughness, ductility and thermal fatigue resistance, and make the steel have good weldability.
 When the same strength is reached, adding vanadium nitride can save 30-40% of vanadium addition, thereby reducing costs. Vanadium-nitrogen alloy can be used in structural steel, tool steel, pipe steel, rebar and cast iron.
 The vanadium-nitrogen alloy used in high-strength low-alloy steel can simultaneously carry out effective vanadium and nitrogen microalloying, promote the precipitation of carbon, vanadium, and nitrogen compounds in the steel, and more effectively play the role of settlement strengthening and grain refinement.

 
Manufacturing method of Vanadium carbide powder
1. fully mix carbon powder with vanadium pentoxide, and reduce at a temperature above 1300℃ in a high vacuum to obtain vanadium carbide. 
2. Pure VC can be prepared by gas phase reaction. Hydrogen gas containing VCl4 vapour of vanadium tetrachloride and hydrocarbon gases (methane, benzene, etc.) is passed through a tungsten wire heated by direct electricity to make it react. In order to prevent the metal vanadium generated at the initial stage of the reaction from forming an alloy with tungsten wire, the temperature of tungsten wire should be kept below 1400℃. After a strong VC layer is formed, the temperature is raised to 2000℃ to complete the carbonization reaction. Off-white crystals are precipitated on tungsten wires, and directional aggregates can be obtained.
3. It is prepared from vanadium by carbonization. The mixture of metal vanadium powder or vanadium hydride powder (particle size should be less than 325 mesh, preferably less than a few microns) and carbon black (the carbon black content is 5% ~ 10% more than the theoretical carbon content after dry mixing in a ball mill) is pressed and moulded. High pressure (about 3 tons/cm2) is used to pressurize metal vanadium, and low pressure (about 1 ton/cm2) is used to pressurize vanadium hydrogenation. The pressed powder is stored in a graphite crucible (in a vacuum of about 133322Pa), heated to 1,800 ~ 2,000℃ for 1 hour, and carburized (the reaction temperature and holding time depend on the particle size, reaction performance and filling amount of raw materials, etc.).
4. Use the reduction method. Vanadium carbide can be prepared by fully mixing carbon powder with vanadium pentoxide, and reducing it at a temperature above 1300℃ in a high vacuum.

Price of Vanadium carbide powder
Vanadium carbide particle size and purity will affect the product's price, and the purchase volume can also affect the cost of Vanadium carbide. A large amount of large amount will be lower. The price of Vanadium carbide can be found on our company's official website.
 
Vanadium carbide powder supplier
Luoyang Tongrun Nano Technology Co. Ltd.  (TRUNNANO) Luoyang City, Henan Province, China, is a reliable and high-quality global chemical material supplier and manufacturer. It has more than 12 years of experience providing ultra-high quality chemicals and nanotechnology materials, including Vanadium carbide, nitride powder, Vanadium carbide powder, sulfide powder, and 3D printing powder. If you are looking for high-quality and cost-effective Vanadium carbide, you are welcome to contact us or inquire any time.

 
RNDKOREA | Sodium Silicate | Potassium Silicate | Spherical Alumina | Spherical SiO2 Powder | Zinc Sulfide ZnS Powder | 3D Printing Powder | Concrete foaming agent | Concrete Superplasticizer | Boron Nitride Powder | Nano Silicon Powder | CuO Powder | Cu2O Cuprous Oxide Powder | Cr2O3 Powder