Why titanium carbide can improve grinding accuracy and surface finish?
Views : 92
Author : Lzh
Update time : 2023-02-05 11:37:21
What is titanium carbide? The chemical formulatitanium carbide, with a molecular weight of 59.89, is a gray metallic face-centered cubic lattice solid with a melting point of 3140 ± 90 ℃, a boiling point of 4820 ℃, and a relative density of 4.93. The hardness is greater than 9. It is insoluble in water, soluble in nitric acid, and aqua regia. It is stable in the air when it exceeds 800 ℃, eroded by the air when it exceeds 2000 ℃, and can react with pure O2 at 1150C. Preparation method: the mixture of titanium powder and carbon obtained by hydrogen reduction of TiO2 acts at high temperature or is mixed and pressed into a block by TiO2 and carbon powder. It is then heated to 2300-2700 ℃ in an electric furnace and carbonized in H2 or CO atmosphere. Purpose: to make cemented carbide, also used as an electrode and abrasive for arc lamps.
Preparation of titanium carbide Chemical vapor deposition method: This synthesis method uses TiCl4, H2, and C reactions. The reactant reacts with the hot tungsten or carbon monofilament. TiC crystals grow directly on the monofilament. The production and sometimes even quality of TiC powder synthesized by this method are strictly limited. In addition, due to the strong corrosivity of TiCl4 and HCl in the product, special care should be taken during synthesis. Sol-gel method: preparing small particle-size products by fully mixing and dispersing materials with the solution. It has the advantages of good chemical uniformity, small particle size and narrow distribution of powders, low heat treatment temperature, etc... Still, the synthesis process is complex, and drying shrinkage is large.
Use of titanium carbide Titanium carbide abrasive in the abrasive and abrasive industry is an ideal material to replace traditional abrasive materials such as aluminum oxide, silicon carbide, boron carbide, chromium oxide, etc. The abrasive capacity of nanometer titanium carbide can be comparable to that of artificial diamond, which greatly reduces the cost. It has been widely used in the United States, Japan, Russia, and other countries. Abrasives, grinding wheels, grinding paste, and other products made of nanometer titanium carbide can greatly improve the grinding efficiency, grinding accuracy, and surface finish.
Price of titanium carbide Titanium carbide particle size and purity will affect the product's price, and the purchase volume can also affect the cost of titanium carbide. A large amount of large amount will be lower. The price of titanium carbide can be found on our company's official website.
Titanium carbide supplier Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) Luoyang City, Henan Province, China, is a reliable and high-quality global chemical material supplier and manufacturer. It has more than 12 years of experience providing ultra-high quality chemicals and nanotechnology materials, including titanium carbide, nitride powder, graphite powder, sulfide powder, and 3D printing powder. If you are looking for high-quality and cost-effective titanium carbide, you are welcome tocontact usor inquire at any time.
