What is Copper/Nickel Clad Plate nickel plated copper sheet:
Copper/nickel composite board is composed of two materials with different properties, namely copper and nickel. This composite material has many advantages, such as good antibacterial properties, high strength, light weight, easy processing and molding, etc. The structure of the copper/nickel composite plate is usually to place the nickel alloy plate on the copper plate, and then weld the two together by welding. This composite material can withstand large loads while having high corrosion resistance, which can maintain its integrity and safety for a long time
Copper Clad Nickel Plate
Advantage/Characteristics of Copper/Nickel Clad Plate nickel plated copper sheet:
Copper/nickel composite panels have many advantages, such as:
Good conductivity: Both copper and nickel have very good conductivity, so the composite board can effectively reduce the resistance in the circuit and improve the working efficiency of the circuit.
Good thermal conductivity: Since copper and nickel have relatively good thermal conductivity, the composite board can effectively improve the heat dissipation efficiency of the circuit and reduce the temperature of the circuit.
Good corrosion resistance: Both copper and nickel have strong corrosion resistance, so the composite board can effectively prevent corrosion in the circuit.
High strength: Both copper and nickel have relatively high strength, so the composite board can effectively improve the mechanical properties of the circuit.
Therefore, copper/nickel composite boards are widely used in the electronics industry to manufacture various electronic components and equipment, such as transformers, inductors, transistors, integrated circuit boards, etc.
Specification of Copper/Nickel Clad Plate nickel plated copper sheet:
| Parameter | Specification |
| Base Material | Nickel 201 or 200 |
| Cladding Material | Oxygen-Free Copper (C10200 or C10100) |
| Total Thickness | 0.5 mm - 50 mm |
| Copper Layer Ratio | 10% - 30% of total thickness |
| Bond Strength | ≥ 175 MPa |
| Electrical Conductivity | ≥ 40% IACS |
| Surface Finish | Ra ≤ 3.2 μm |
| Flatness | ≤ 0.1% of length |
| Temperature Resistance | Up to 400°C |
| Corrosion Resistance | Excellent in marine environments |
| Available Forms | Plates, sheets, strips |
| Standard Sizes | Width: 100mm - 2000mm, Length: 200mm - 6000mm |
| Chemical Composition (Ni Base) | Ni: 99.0% min, C: 0.15% max, Mn: 0.35% max, Fe: 0.40% max, S: 0.01% max, Cu: 0.25% max |
| Chemical Composition (Cu Layer) | Cu: 99.95% min, O: 0.001% max, Other elements: 0.049% max |
| Mechanical Properties | Tensile Strength: 380-550 MPa, Yield Strength: ≥ 170 MPa, Elongation: ≥ 30% |
| Quality Standards | ASTM B432, GB/T 8120, DIN 17471 |
Applications of Copper/Nickel Clad Plate nickel plated copper sheet:
The application of copper/nickel composite board is very extensive, mainly including the following aspects:
Buildings: Copper/nickel composite panels are often used in exterior walls, beams, floors, doors, windows and other parts of buildings, which can withstand large loads and have high corrosion resistance.
Automobile: Copper/nickel composite board is widely used in the automobile industry, such as engine, exhaust system, radiator and other parts, which can improve the performance and life of the automobile.
Electronics industry: Copper/nickel composite boards are widely used in the electronics industry, such as circuit boards, resistors, capacitors and other parts, which can improve the performance and reliability of electronic components.
Home appliances: Copper/nickel composite boards are widely used in the home appliance industry, such as rice cookers, electric kettles, induction cookers and other parts, which can improve the performance and service life of home appliances.
Aerospace: Copper/nickel composite plates are widely used in the aerospace industry, such as aircraft engines, fuel systems, transmission systems, etc., which can improve the performance and reliability of aircraft.
Chemical industry: Copper/nickel composite plates are widely used in the chemical industry, such as pipelines, valves, pumps and other parts, which can improve the performance and reliability of chemical equipment.
Medical equipment: Copper/nickel composite boards are widely used in the medical equipment industry, such as surgical instruments, medical beds and other parts, which can improve the performance and safety of medical equipment.
Applications of Copper/Nickel Clad Plate nickel plated copper sheet
Grade of Copper/Nickel Clad Plate nickel plated copper sheet:
T2.T3,TP1,TP2.TU1,TU2.H80.H62,QSn6.5-0.1.BFe30-1-1,BFe10-1-1
N4.N6,NCu28-2.5-1.5,NCu30
Standard of Copper/Nickel Clad Plate nickel plated copper sheet:
NB-T 47002.4-2009
Package of Copper/Nickel Clad Plate nickel plated copper sheet:
According to product characteristics and customer needs.
Remark of Copper/Nickel Clad Plate nickel plated copper sheet:
Please provide detailed technical requirements to facilitate communication and determine the solution.
Copper/Nickel Clad Plate nickel plated copper sheet supplier-TRUNNANO:
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality clad plate, clad rod, clad tube, etc.
If you are looking for high-quality Copper/Nickel Clad Plate, please feel free to contact us and send an inquiry.
FAQs of Copper/Nickel Clad Plate (Nickel Plated Copper Sheet)
Q: What is copper/nickel clad plate used for?
A: Copper/nickel clad plates, also known as nickel-plated copper sheets, are widely utilized in industries that require materials with a combination of excellent electrical conductivity and corrosion resistance. Common applications include the fabrication of heat exchangers, electronic components, connectors, and contacts due to their superior thermal and electrical properties. They are also popular in marine environments where they provide anti-fouling protection and durability against seawater corrosion. Additionally, these materials are found in chemical processing equipment, architectural cladding, and decorative finishes.
Q: Is there any health concern associated with handling copper/nickel clad plate?
A: Handling copper/nickel clad plates typically does not pose significant health risks under normal conditions. However, it's important to note that if the material is processed through cutting, grinding, or welding, fine metal particles or fumes can be generated. These may cause irritation to the respiratory system and eyes if proper protective measures are not taken. It is advisable to use personal protective equipment such as gloves, safety glasses, and respirators when handling or working with this material, especially during machining operations. Always follow the manufacturer's guidelines and adhere to occupational safety standards.
Q: What is the composition of copper/nickel clad plate?
A: Copper/nickel clad plates consist of a base layer of copper which provides the material with its high electrical and thermal conductivity. The copper core is then coated or clad with a layer of nickel. This outer nickel layer adds mechanical strength, enhances corrosion resistance, and improves wear resistance. The thickness of the nickel coating can vary depending on the specific requirements of the application. Some products may also feature additional coatings or treatments to further enhance certain properties like solderability or appearance.
Q: Can copper/nickel clad plates be used in corrosive environments?
A: Yes, copper/nickel clad plates are well-suited for use in corrosive environments. The nickel layer acts as a barrier that protects the underlying copper from reacting with corrosive substances. This makes the material particularly useful in marine applications, chemical processing, and other environments where exposure to moisture, salt, acids, or alkalis is common. The nickel coating also contributes to the material's longevity by resisting oxidation and maintaining its structural integrity over time. However, it's essential to select the appropriate grade and thickness of nickel plating based on the severity of the environmental conditions.
Q: Are copper/nickel clad plates suitable for electrical applications?
A: Copper/nickel clad plates are highly suitable for electrical applications due to the inherent electrical conductivity of copper combined with the protective benefits of nickel. Copper is one of the best conductors of electricity, making it an ideal choice for electrical wiring, busbars, and other conductive elements. The nickel coating helps protect the copper from corrosion while preserving its conductivity. This makes the material valuable in the manufacturing of connectors, terminals, and other electrical hardware where reliability and performance are critical. Furthermore, the nickel surface can be easily soldered or welded, facilitating assembly processes.
Q: How do copper/nickel clad plates contribute to sustainability?
A: Copper/nickel clad plates support sustainability efforts in several ways. Both copper and nickel are recyclable materials, contributing to resource conservation and waste reduction. The efficient use of these metals in clad form means less raw material is required compared to using solid blocks of either metal alone. Moreover, the extended lifespan of components made from copper/nickel clad plates due to their enhanced durability reduces the frequency of replacements, leading to lower overall material consumption. In addition, the improved energy efficiency resulting from their superior electrical and thermal conductivity can lead to reduced energy usage in various applications.
