What is Ti6Al4V? Ti-6Al-4V (UNS designation R56400), sometimes called TC4, Ti64, or ASTM Grade 5, is an alpha-beta titanium alloy with high specific strength and excellent corrosion resistance. The oxidation behavior of Ti-6Al-4V alloy was essentially reported at temperatures between 600 and 1100 °C and for durations up to 300 h. It is the first time report the formability of titanium alloy Ti–6Al–4V in electromagnetic forming. The formability of Ti–6Al–4V in electromagnetic forming increased by 24.37% compared to the quasi-static. It is one of the most commonly used titanium alloys. The fatigue properties of Ti-6Al-4V alloy are so notable. Titanium and its alloys have similar properties of fatigue to steel alloys. The alpha phase tends to control the mechanical properties of this alloy when used at low temperatures. It has been determined that Ti6Al4V material will have a thermal emissivity between 0.3-0.4 if produced by the DMLS method.
What is the grain size of Ti-6Al-4V? During the heat treatment processing, grain recrystallization increased in all the alloys. The acicular martensite turned into a lamellar α phase, and the grain length of Ti-6Al-4V was approximately 100 μm, whereas that of Ti-6Al-4V-0.9Fe was 30 μm. Because of its disadvantages of low surface hardness values, a high coefficient of friction, and poor wear resistance, Ti6Al4V alloy is seldom used in tribological-related engineering components. Commercially pure titanium and titanium alloy, represented by Ti-6Al-4V, is mainly used for the airframe and the engine parts, respectively. The demand expansion of titanium has been expected due to low aircraft fuel consumption. The results show that the highest impact toughness value of 19.3 J was achieved after α/β annealing and is comparable with typical values given in the literature for wrought Ti-6Al-4V. It is one of the most commonly used titanium alloys.
What are the characteristics of Ti-6Al-4V? Ti6Al4V is a titanium alloy widely used in several industrial applications such as aerospace, biomedical, chemical, and food industries. That is due to its superior properties, such as high corrosion resistance, high specific resistance, excellent biocompatibility, and good thermal/chemical stability. However, the as-SLMed Ti-6Al-4V alloy parts typically exhibit low flexibility because of the formation of acicular and brittle α′ martensites. It is essential to use post-heat treatment to change their microstructures to achieve superior mechanical properties. The preliminary results showed that although all implants have the same chemical composition, their microstructural characteristics vary broadly.
Price of Ti6Al4V Ti6Al4V particle size and purity will affect the product's Price, and the purchase volume can also affect the cost of Ti6Al4V. A large amount of large amount will be lower. The Price of Ti6Al4V is on our company's official website.
Ti6Al4V supplier Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) Luoyang City, Henan Province, China, is a reliable and high-quality global chemical material supplier and manufacturer. It has more than 12 years of experience providing ultra-high quality chemicals and nanotechnology materials, including Ti6Al4V, nitride powder, graphite powder, sulfide powder, and 3D printing powder. If you are looking for high-quality and cost-effective Ti6Al4V, you are welcome to contact us or inquire at any time.
