Introduction And Application of Titanium Carbide TiC Powder
Views : 155
Update time : 2023-08-04 14:56:38
What is Titanium Carbide? Titanium carbide, the chemical formula TiC, is a gray crystal of steel with a metallic luster. TiC has thermal conductivity and electrical conductivity, and its electrical conductivity decreases with the increase in temperature, so it shows metallic properties. It is a very hard compound with a high melting point, and its hardness is second only to diamond with a microhardness of 2850 kg/mm2. It belongs to the NaCl-type square system, which has the same lattice and parameters as TiN and TiO.Series of continuous solid solutions can be maded between them. TiC is insoluble in hydrochloric acid and lye, soluble in nitric acid and aqua regia. TiC has a wide range of applications. With the further improvement and industrialization of microwave synthesis of nano-TiC powder, the properties of the corresponding materials prepared by nano-TiC powder will be greatly improved, and some may have qualitative leaps, attractive prospects, and wide applications.
Characteristic of Titanium Carbide TiC Titanium carbide (TiC) carbon and titanium compounds with high-temperature resistance, high strength, high hardness, high wear resistance, corrosion resistance, and other properties. It is widely used in the manufacture of wear-resistant materials, cutting tool materials, aerospace, medical instruments, and many other fields.
At present, titanium carbide gradually replaces traditional wear-resistant materials such as silicon carbide, boron carbide and chromium oxide in the market and becomes a wear-resistant material with great application value. The wear resistance is comparable to that of synthetic diamond, and its hardness can reach more than HRA90. At the same time, it can withstand high temperatures of 300C, so it has been widely used. The production of wear-resistant products with titanium carbide materials can greatly reduce the cost and wear rate and improve the accuracy and finish.
What is Titanium Carbide TiC metal? Titanium carbide, TiC, is one of the extremely hard refractory ceramic material. It registers 9–9.5 on the Mohs scale. It's considered to be the hardest carbide material known now. It shows the appearance of fine black powder and has a face-centered cubic crystalline structure.
Application of Titanium Carbide TiC 1. Titanium Carbide used in Multiphase Materials. Titanium carbide ceramics belong to superhard tool materials. All kinds of multiphase ceramic materials are made of TiC, TiN, WC, A12O, and other raw materials. These materials have high melting points, high hardness, and excellent chemical stability and are the preferred materials for cutting and wear-resistant tool parts. At the same time, they have excellent electrical conductivity and are the preferred materials for electrodes. 1) tool material: 2) Aerospace components: 3) surfacing electrode:
2. Titanium Carbide is used as coating material. 1) Diamond coating: 2) Anti-tritium coating in a fusion reactor. 3) coating of electrical contact material; 4) Roadheader pick coating
3. Preparation of foam Ceramics by Titanium Carbide. Foam ceramic as a filter can remove inclusions in all kinds of fluids effectlly, and its filtration mechanism is mostly adsorption and agitation. This type of filter requires the chemical stability of the material, especially the filter used in the metallurgical industry requires a high melting point. Majority of the type of material are oxides, and to adapt to the filtration of metal melt, they mainly pursue the improvement of thermal shock resistance. Titanium carbide foam ceramics have better strength, hardness, thermal conductivity, thermal conductivity, heat resistance, and corrosion resistance than oxide foam ceramics.
4. Application in infrared radiation ceramic materials. Titanium carbide is intermetallic compound, which usually shows good chemical stability and does not change in valence state, but this system is a sample prepared under the condition of high-temperature reduction; some titanium ions have the phenomenon of valence change, and the titanium ions with variable valence are solid melted into the structural position occupied by cordierite structure. This structural change makes the radiation properties of the materials obviously improve compared with the emissivity near 3tma alone. It is beneficial to the application in the field of high temperature.
Price of Titanium Carbide TiC Price depends on the amount of your phurschaing. The larger the quantity, the price will be lower. Please contact us directly through e-mail or telephone on price.
Titanium Carbide TiC supplier Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a high-quality global chemical material supplier and manufacturer which owns >12 years of experience providing ultra-high quality chemicals and nanotechnology materials, including Zinc sulfide, nitride powder, Zinc sulfide powder, sulfide powder, and 3D printing powder. You are always welcome to contact us or inquire at any time on titanium carbide TiC powder.
