Introduction of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
3D printing uses energy sources such as laser, electron beam, arc, plasma, etc. to scan metal powder and wire point by point and line by line, melt the powder or wire, overlap line by line, solidify and accumulate layer by layer, and achieve the "near net shape" of three-dimensional complex parts. Our company has a variety of brands to choose from, and the 3D printing metal powder with the brand Ti6Al7Nb is one of them.
Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
Features of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
Ti6Al7Nb, also known as TC20, is a titanium alloy specifically designed for 3D printing applications, offering a range of properties that make it highly suitable for various industries. Here are the key features of Ti6Al7Nb 3D Printing Alloy Powder:
High Biocompatibility: Ti6Al7Nb is widely recognized for its excellent biocompatibility, making it a preferred choice for medical implants, orthopedic devices, and dental applications where direct interaction with human tissue is required.
Enhanced Corrosion Resistance: The addition of aluminum and niobium to titanium increases the alloy's resistance to corrosion, particularly in saline and acidic environments, which is vital for medical and marine applications.
Improved Strength and Toughness: Compared to commercially pure titanium, Ti6Al7Nb offers higher tensile strength and toughness, enabling it to withstand greater mechanical loads and impacts without fracturing, suitable for aerospace and automotive parts.
Optimal Density and Weight Reduction: As a titanium alloy, it maintains a relatively low density, contributing to weight reduction in parts without compromising on strength, ideal for lightweight structures and aerospace components.
Excellent Thermal Stability: The alloy demonstrates good thermal properties, maintaining its structural integrity and mechanical properties at elevated temperatures, making it suitable for high-temperature applications.
Superb Fatigue Resistance: Ti6Al7Nb shows enhanced fatigue resistance, meaning it can withstand cyclic loading without failure, an important factor for parts subject to repeated stresses, such as in aerospace engines or biomedical implants.
3D Printability: Specifically formulated for additive manufacturing, the powder has optimized particle size distribution, flowability, and low oxygen content, ensuring consistent and reliable prints with intricate details and complex shape.
Customizability: The alloy’s composition can be fine-tuned to achieve specific mechanical properties, making it adaptable for diverse application requirements.
Post-Processing Flexibility: After printing, Ti6Al7Nb parts can be machined, polished, or subjected to heat treatments to refine their dimensional accuracy, surface finish, or to alter the microstructure for improved properties.
Radiopacity: The presence of niobium in the alloy can increase radiopacity, which is beneficial for medical implants that require visibility under X-rays for monitoring and placement verification.
In summary, Ti6Al7Nb 3D Printing Alloy Powder (TC20) offers a combination of high biocompatibility, corrosion resistance, strength, and lightweight properties, making it a versatile material choice for industries including medical, aerospace, and automotive, where these qualities are of utmost importance.
Parameter of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
(Product Particle Size and Distribution of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder)
(Electron microscope image of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder)
Advantages of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
3D printing metal powder has good plasticity, high powder purity, low oxygen content, fine particle size, narrow particle size distribution, high sphericity, good fluidity and high bulk density.
3D printing is a revolutionary technology for rapid and precise manufacturing of complex structural parts, which are difficult to manufacture and have high manufacturing costs. The implementation of this technology is very different from traditional manufacturing in terms of metallurgical mechanism, microstructure, structural form, defect form, etc., and can solve some problems encountered by traditional manufacturing methods.
Application Areas of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
Ti6Al7Nb (TC20) 3D Printing Alloy Powder finds application in numerous industries due to its unique blend of properties. Here are some key application areas where this alloy powder is prominently used:
Medical Implants: The biocompatibility, high strength-to-weight ratio, and corrosion resistance make Ti6Al7Nb ideal for manufacturing orthopedic implants such as hip and knee replacements, spinal implants, and dental implants.
Aerospace Components: The alloy's excellent fatigue resistance, thermal stability, and lightweight properties are suited for aerospace applications like engine components, structural parts, and satellite frames, where every gram counts towards fuel efficiency.
Sports Equipment: Ti6Al7Nb's combination of strength and lightness is advantageous for high-performance sports equipment like bicycle frames, golf club heads, and racing car parts, improving overall performance and durability.
Petroleum and Chemical Industry: The corrosion-resistant nature of this alloy is beneficial for parts in contact with corrosive chemicals, such as pump impellers, valve components, and heat exchanger tubes in the petrochemical industry.
Automotive Industry: Lightweight yet strong, Ti6Al7Nb is used in high-performance automotive applications, including engine components, suspension systems, and racing car chassis to reduce weight and improve fuel efficiency.
Marine Applications: The alloy's corrosion resistance in seawater environments is advantageous for marine applications like propellers, hull fittings, and underwater equipment.
3D Printed Tools and Fixtures: The ability to create complex shape and customized tools with Ti6Al7Nb powder makes it suitable for manufacturing jigs, fixtures, and molds used in various industries.
High-Temperature Applications: Thanks to its thermal stability, the alloy is employed in high-temperature environments such as furnace components, heat shields, and exhaust systems.
Electronics: The alloy's excellent electrical conductivity and thermal properties can be harnessed in electronic components like heat sinks, where efficient heat dissipation is crucial.
3D Printing Research and Development: As an advanced material, Ti6Al7Nb powder is also used in research for developing new alloys,
exploring the limits of 3D printing technology, and advancing the understanding of material science.
In summary, Ti6Al7Nb (TC20) 3D Printing Alloy Powder is a versatile material that finds application across a broad spectrum of industries, leveraging its unique properties to enhance performance, durability, and efficiency in critical components and products.
Packaging and Precautions
Packaging according to product characteristics, or customized according to customer needs. Wear protective equipment, goggles, rubber gloves, masks, etc. when using. If accidentally contact with mucous membranes, rinse with plenty of water and seek medical attention in time.
Packaging and Precautions
Company Profile
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder, please feel free to contact us or click on the needed products to send an inquiry.
Company Profile
Payment Term
T/T, Western Union, Paypal, Credit Card etc.
Shipment Term
By air, by sea, by express, as customers request.
FAQs of Ti6Al7Nb 3D Printing Alloy Powder TC20 Metal Powder
Q1. What is Ti6Al7Nb (TC20) 3D Printing Alloy Powder, and why is it significant for additive manufacturing?
A1. Ti6Al7Nb (TC20) is a titanium-based alloy specifically formulated for 3D printing applications. It combines titanium with aluminum and niobium to offer improved mechanical properties, biocompatibility, and corrosion resistance compared to pure titanium. Its significance lies in its ability to produce complex, lightweight parts with high strength and precision, making it ideal for industries like aerospace, medical, and automotive.
Q2. Is Ti6Al7Nb biocompatible?
A2. Yes, Ti6Al7Nb is highly biocompatible, which means it is well-tolerated by the human body and can be used for medical implants without causing adverse reactions. This property makes it a popular choice for orthopedic and dental applications.
Q3. How does the addition of aluminum and niobium affect the properties of Ti6Al7Nb?
A3. Aluminum increases the alloy's strength and hardness, while niobium enhances its corrosion resistance and improves its weldability. Together, they contribute to the alloy's overall enhanced performance in terms of strength, toughness, and biocompatibility.
Q4. What industries commonly use Ti6Al7Nb for 3D printing?
A4. Industries that frequently use Ti6Al7Nb 3D printing powder include aerospace for lightweight, high-strength components, medical for biocompatible implants, automotive for lightweighting efforts, and sports equipment for high-performance parts.
Q5. Can Ti6Al7Nb be post-processed after 3D printing?
A5. Yes, post-processing steps such as heat treatment, machining, and surface finishing can be applied to 3D printed Ti6Al7Nb parts to enhance their mechanical properties, improve dimensional accuracy, or achieve specific surface finishes.
Q6. Is Ti6Al7Nb more expensive than other titanium alloys?
A6. Ti6Al7Nb tends to be more costly than some other titanium alloys due to its specialized composition and the benefits it offers. However, its high performance justifies the cost in applications where weight reduction, strength, and biocompatibility are critical.
Q7. What are the typical applications of Ti6Al7Nb in the medical field?
A7. In the medical field, Ti6Al7Nb is commonly used for manufacturing orthopedic implants like hip and knee joints, spinal implants, and dental implants. Its biocompatibility and mechanical properties make it ideal for long-term implantation.