Elementary

Titanium Ti Powder CAS 16962-40-6

Item No.: Tr-Ti
Titanium powder: The product is silver-gray irregular powder, with large suction capacity, and is flammable under high temperature or electric spark conditions.
Purity>99.9%
Particle size: 60 nm
INQUIRY
Description
Titanium Powder Properties

About Titanium Ti Powder:

Titanium powder is a metal powder with a wide range of uses. Titanium powder is a silver-gray irregular powder with a large suction capacity, high temperature, or sparks under the condition of flammability. Titanium powder metallurgy (P/M) allows manufacturing clean - or near-clean-shaped parts without the material losses and costs associated with machining complex parts from forged billets. Powders can be elemental blending or pre-alloying and then cured by metal injection molding, hot isostatic pressing, direct powder rolling, or laser engineering mesh forming.

Among the metallic elements, titanium element has a high specific strength. It is a high-strength but low-mass metal with fairly good ductility (especially without oxygen). The surface of titanium is a silvery-white metallic luster. Titanium's melting point is high (over 1,649 degrees Celsius), so it is a good refractory metal. It is paramagnetic, and its electrical and thermal conductivity are very low.

Titanium has two allotropes and transforms from the hexagonal most densely packed α type to the body-centered β type at 882 degrees Celsius. The specific heat of type α increases sharply with increasing temperature until it reaches the critical temperature but decreases when it reaches the critical temperature. It remains essentially constant for type β regardless of temperature. Like zirconium and hafnium, titanium also has an ω-state that is thermodynamically stable at high pressure but may also be isostatically stable at atmospheric pressure. This state is generally hexagonal (ideal) or triangular (twisted) and can be observed when soft P-wave acoustic photons cause the plane collapse of a β-type (111) atom.


Titanium powder for sale:

TRUNNANO is a trusted global Pure titanium powder supplier. We also provide titanium powder for 3D printing and titanium alloy powder.

Feel free to inquire about the latest Titanium powder price at any time.


Titanium is considerably hard, though not as strong as higher-grade heat-treated steels. Titanium is non-magnetic and is a poor conductor of heat and electricity. Mechanical handling needs to be careful because titanium will soften and leave an indentation without sharp tools and proper cooling techniques. Like steel structures, titanium structure has a fatigue limit, which ensures durability in some applications. The specific stiffness of titanium alloy is generally not as good as other materials, such as aluminum alloy and carbon fiber, so it is rarely used in structures requiring high stiffness. 

 

Features of Titanium Ti powder CAS 16962-40-6:

Item

Purity

APS

SSA

Color

Morphology

Bulk Density

Titanium Nanoparticle

99.9%

60nm

15 m2/g

Black

Spherical

0.54 g/cm3

 

Titanium powder for sale:

TRUNNANO is a trusted global Pure titanium powder supplier. We also provide titanium powder for 3D printing and titanium alloy powder.

Feel free to inquire about the latest Titanium powder price at any time.

Titanium is considerably hard, though not as strong as higher-grade heat-treated steels. Titanium is non-magnetic and is a poor conductor of heat and electricity. Mechanical handling needs to be careful because titanium will soften and leave an indentation without sharp tools and proper cooling techniques. Like steel structures, titanium structure has a fatigue limit, which ensures durability in some applications. The specific stiffness of titanium alloy is generally not as good as other materials, such as aluminum alloy and carbon fiber, so it is rarely used in structures requiring high stiffness. 

 

How is Titanium metal Powder produced?

 

 

 

 

The traditional titanium production technology is through the Kroll process, that is, in the presence of carbon in the presence of chlorinated titanium dioxide ore, TiCl4 generated by the reaction with magnesium to form a titanium sponge. These processes occur at temperatures up to 1040°C. The particle size range of sponge particles is 45 ~ 180 μm, and the particle size within 150 μm is called "sponge particles."These tiny particles are irregularly shaped, porous, and spongy, and then the fine powder is mixed with an alloy additive. The green compaction was cold-pressed at 415 MPa and then vacuum-sintered at 1260 ° C to produce components of 99.5% density. Hot isostatic pressing (HIP) can further increase the density of these parts, making it more economical to produce parts than casting or forging parts. Still, the porosity present in the material reduces fatigue and fracture properties.

 

 

 

Applications of Titanium Ti Powder:

Titanium flash powder is used in pyrotechnic manufacturing to provide bright burning particles.

Titanium powder is also used in air purifiers (filter coatings) and in the film that is attached to building Windows that, when exposed to ultraviolet light (solar or artificial) or moisture in the air, produces highly reactive REDOX species, such as hydroxyl groups, that clean the air or keep window surfaces clean.

Titanium makes propeller shafts, rigging, and heat exchangers in desalination plants because it is not easily corroded by seawater.

Titanium Ti powder is also used in cold water heaters in saltwater aquariums, fishing lines, and diving knives. Titanium is used to make housing and other components for Marine surveillance deployments and scientific and military surveillance devices.

Titanium sponge powder is used to produce titanium ingot, which is used to make slab, billet, bar, plates, sheet, and other titanium mill products.

 

Storage Conditions of Titanium Ti powder:

The damp reunion will affect its dispersion performance and use effects. Therefore, this product should be sealed in a vacuum, stored in a cool and dry room, and not exposed to air. In addition, the Titanium Nanoparticles should be avoided under stress.

 

Ti Nanoparticles Cautions:

1. Ti nanoparticle is flammable. It should be gently placed and avoid violent vibration and friction.

2. Titanium Nanoparticles should be prevented from moisture, heat, impact, and sunlight.

3. The user must be a professional (This person must know how to use Titanium Ti Nanoparticles.)

If you are looking for high-quality titanium powder, please feel free to contact us and send an inquiry. ([email protected])
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.

 

Packing & Shipping of Titanium Ti powder:

Titanium Ti powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.
Titanium Ti powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
We have many different kinds of packing which depend on the Titanium Ti powder quantity.

 

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12 years of experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.

If you are looking for high-quality Titanium Ti powder, please feel free to contact us and send an inquiry. ([email protected])

 

 

 

Titanium Powder Properties

Other Names titanium nanopowder, titanium nano-particles,
titanium nano-powder, nanotitanium, nano-titanium
CAS No. 7440-32-6
Compound Formula Ti
Molecular Weight 47.86
Appearance Black Powder
Melting Point 1660 ℃
Boiling Point 3287 ℃
Poisson's Ratio 0.32
Solubility in H2O N/A
Thermal Expansion (25 °C) 8.6 µm·m-1·K-1
   
   

Titanium Powder Health & Safety Information

Signal Word Danger
Hazard Statements H250
Hazard Codes P210-P231-P280-P302 + P334-P370 + P378-P422
Risk Codes N/A
Safety Statements N/A
Transport Information UN1383- class 4.2 - PG 1
Amorphous Boron Powder | High Purity Graphite Powder | Boride Powder | 3D Printing Powder | Zinc Sulfide ZnS Powder | Oxide Powder | Silicide Powder